In well-known brands that produce dryers, the causes of sounds may differ, but the main causes are the same for all. The main manufacturers of drying machines:

• Samsung
• GE
• Whirpool
• Kenmore
• Maytag

How to Fix Squeaking Dryer

You can distinguish between the following types of sounds that the dryer can make during operation:

• high squeaking noise
• squeaking noise
• grinding noise
• screeching noise
• thump noise

High Squeaking Noise

• You may hear a high-frequency squeak during the first drying process. It may be caused by a pump, humidity sensor or felt strip which needs to be slightly wet before use.
• A high squeaking may also be caused by a bad bearing, bushing, winding or motor start.
• The cause may also be in the drive belt. After years of use, it may crack and cause a squeaking noise during the dryer operation. Disconnect the machine from the mains, remove the bottom access panel, check the belt and replace it if it is worn.

Squeaking Noise

The following reasons of dryer squeaking loudly are likely:

Grinding Noise

The drum support bearing wears out during operation, resulting in this noise. To correct this problem, the dryer must be disconnected from the mains, the front panel and belt removed, and then the drum must be turned manually. If this is very difficult to do and the same noise appears, it means that the bearing has to be replaced.

Screeching Noise

This type of noise is caused by worn-out drum rollers and shaft. To eliminate this noise, you should unplug the dryer, remove the front panel and rollers and check their condition. If they look worn, they should be replaced, if not, they should be cleaned and oiled. This will allow the drum to rotate easily.

Thump Noise

A torn seal drum can produce this noise. If you notice tears or black marks on your clothes after drying, it only confirms this option. The reason for the torn seal drum also lies in years of use. To solve this problem, you need to disconnect the dryer from the power supply, open the dryer housing and remove the drum. Install a new sealing strip around the drum. Install the drum after it has dried.

Conclusion

In order not to get into an unpleasant situation, in case of any extraneous noise, please contact the professionals. All works, diagnostics, repairs, replacement of damaged parts are performed in a short period of time at the client’s home. All work is covered by a guarantee. Call Safe Air Duct Cleaning if you have any questions.

The post Dryer Squeaking When Running appeared first on Safe ADC.

Pros and Cons of Vertical Placement

• If it is possible to install above the washing, it is better to do so. This method has several significant advantages. First of all, it saves space in the room. This is a significant factor for a standard city apartment with a small area. Usually, the bathrooms are tiny, which does not allow us to place all the equipment near the floor.
• The location above the washing machine saves time. After washing, it is enough just to take things out of the washing machine and immediately load them into the dryer. There is no need to move around the room and carry things in a basket or basin accordingly. In this case, loading things into the dryer takes only a couple of minutes.
• The main disadvantage is the need to use additional fastening structures and parts. Thus, more time is required for the installation, for the installation will have to make some effort. There may be difficulties with the connection of certain models of dryers. For example, a condensation dryer will need to be connected to a hood. The washing machine is not always located under the ventilation grille. Accordingly, additional ventilation ducts will have to be installed to connect the dryer to the extractor hood.
• The difficulty is also in the future replacement or rearrangement of furniture. Due to the dryer’s fixed position, it will not be possible to change the furniture easily. It may be necessary to dismantle and then reinstall the dryer.
• Therefore, it is important to consider all the above factors before buying and installing a dryer. It should be installed in such a way as to ensure a comfortable and safe operation and to avoid future difficulties.

Rules for Stacking Washer and Dryer

Errors or carelessness in the installation will inevitably create difficulties for you in operation. Therefore it is always better to entrust this job to an experienced specialist.

Moments That are Worth Paying Attention to

• Do not use mounts that you have doubts about.
• Never switch on 2 units at a time (even if you are sure of the quality of mounts and reliability of wiring).
• Remember: during operation, the dryer vibrates strongly, so leave a gap of two or three centimeters from the wall.
• If possible, buy home appliances from the same company. In the set, it will look as harmonious as possible, will fit perfectly in any interior, and the fixtures will fit perfectly.
• No possibility to buy units from the same manufacturer? Choose units of the same size (the overall dimensions of the bottom equipment under no circumstances should not be less than the dimensions of the drying room).
• Never place the laundry dryer underneath the washing machine, as the latter is always much heavier and vibrates much more during the washing process.

The most important rule is that the installation must be safe. Do you doubt your abilities? Trust the installation to a professional who knows all the details of this case.

The post How to Stack Washer and Dryer appeared first on Safe ADC.